Table of Contents
Advertisement
Adjustment procedure multiple projector installations :
Inportant : to allow corrections in the deviation alignments of the slave
projectors, never adjust the deviations of the master projector to its
maximum.
Default setting of the Master projectorn see 'Stand-Alone projector'.
Highlight 'ADJUST DEVIATION' by pushing the control disk up or
down and press ENTER .
When adjusting the horizontal and the vertical deviation, the picture
moves in corresponding direction, allowing the set up of the deviation
without orbiting operation.
Push the control disk to the right or down to toggle between Hor. and
Vert. deviation adjustment.
5975198 RETRODATA 808s 210397
Adjust horizontal deviation by pushing
the control disk to the left or to the right
Adjust vertical deviation by pushing
the control disk up or down
Orbiting
SLAVE ORBITING
CHANGE TO MASTER
ADJUST DEVIATION
SELECT WITH
OR
THEN <ENTERN>
DEVIATION ADJUST :
VERTICAL WITH
OR
HORIZONTAL WITH
OR
<EXIT> to return.
HORIZONTAL
ORBIT AMPL
70
VERTICAL
ORBIT AMPL
70
A-3
Advertisement
Table of Contents
