Table of Contents
Advertisement
A
ORBITING
Orbiting (option)
Static pictures are very often shown on large screen projectors,
espectially in process control and presentation applications. Due to
the fact that the same picture information is shown for a long period
on the same place, picture tubes can be damaged by 'local burn-in'.
Adjustment procedure :
The orbiting path is automatically added to the Random access
adjustment mode menu when installed.
Press ADJUST to enter the adjustment mode and select Random.
The Random Access Adjustment Mode menu will be displayed.
Highlight ORBITING by pushing the control disk up or down and
press ENTER .
Orbiting Mode Toggle Switches
The orbiting module is provided with a three pin connector for
connection with the BARCO's BCl link option module, used in
multiple projector installations. For Orbiting, one projector operates
as master wheras the others operate as slave.
Master/Slave Toggle
Highlight 'CHANGE TO SLAVE' with the control disk and press
ENTER to set the projector as Slave.
Highlight 'CHANGE TO MASTER' with the control disk and press
ENTER to set the projector as Master.
Orbiting ON/OFF toggle (only in Master Orbiting)
Highlight 'MODE : ON' with the control disk and press ENTER to set
the ORBITING OFF.
Highlight 'MODE : OFF' with the control disk and press ENTER to set
the ORBITING ON.
ENTER toggles between mode on and off.
EXIT returns to the Path selection menu.
5975198 RETRODATA 808s 210397
To avoid this problem, BARCO has designed special Orbiting circuitry
which moves the picture very slow around a predefined screen area.
The orbiting circuitry has been designed using a very long cycle time
to make the movement of the projected image imperceptible.
MASTER ORBITING
CHANGE TO SLAVE
SPEED : FAST
ADJUST DEVIATION
SELECT WITH
THEN <ENTERN>
DEVIATION ADJUST :
VERTICAL WITH
HORIZONTAL WITH
<EXIT> to return.
Orbiting
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
FOCUSING
COLOR SELECT
ORBITING
CONTR. MODULATION
SOFT EDGE
Select with
or
then <ENTER>
<EXIT> to return.
MODE : ON
OR
OR
OR
SLAVE ORBITING
CHANGE TO MASTER
SELECT WITH
OR
THEN <ENTERN>
DEVIATION ADJUST :
VERTICAL WITH
OR
HORIZONTAL WITH
OR
<EXIT> to return.
MASTER ORBITING
CHANGE TO SLAVE
MODE : ON
SPEED : FAST
ADJUST DEVIATION
SELECT WITH
OR
THEN <ENTERN>
DEVIATION ADJUST :
VERTICAL WITH
OR
HORIZONTAL WITH
OR
<EXIT> to return.
A-1
Advertisement
Table of Contents
