Guarantee - Heatrae Sadia ELECTROMAX Installation & Servicing Instructions Manual

Combined electric flow boiler and direct unvented water heater
Table of Contents

Advertisement

10.0 Guarantee

This product is guaranteed against faulty
materials and manufacture. The following
guarantee periods apply from the date of
purchase:
Stainless steel cylinder
Electric boiler
DHW Expansion Vessel
All other valves, fittings and electrical parts
provided that:
The unit has been installed in accordance
with
the
Installation
instructions and all relevant codes of
practice and regulations in force at the
time of installation, and that all necessary
controls and safety valves have been
fitted correctly.
Any valves and controls fitted are of
Heatrae Sadia recommended type and
specification.
The unit has not been modified or
tampered with in any way and has been
regularly maintained as detailed in these
instructions.
The domestic hot water cylinder has only
been used for the storage of wholesome
water as defined by the water supply
(Water Fittings) Regulations 1999.
The primary water circuit has been flushed
and treated with a suitable inhibitor
and is used only for domestic heating
purposes.
Within 60 days of installation the user
completes and returns the guarantee
Registration card supplied with the unit in
order to register the product.
The unit is not guaranteed against damage by
frost and the immersion heaters are not
guaranteed against excessive scale
build-up.
Periodic loss of charge pressure from the
expansion vessels is normal (indicated by
10 years
2 years
5 years
2 years
and
service
an intermittent discharge of water from the
expansion or primary pressure relief valves) and
is not covered under the product guarantee.
This guarantee does not affect your statutory
rights.
Environmental Information
This product is manufactured from many
recyclable materials. At the end of its
useful life it should be disposed of at a Local
Authority Recycling Centre in order to realise
the full environmental benefits.
Insulation of the DHW Cylinder is by means
of an approved CFC/HCFC free polyurethane
foam with an ozone depletion factor of zero
and a Global Warming Potential (GWP) of 3.1.
Installation & Servicing Instructions
43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents