Connections At The Remote Module; Keyboard, Video And Mouse Connections; Twisted Pair, Power And Serial Connections - Lindy PRO-300 User Manual

English Manual

Connections at the REMOTE module

3.4 Keyboard, video and mouse connections

The connections to the keyboard, video monitor and mouse are all made to the sockets at one end of the
REMOTE module.
1 Attach the lead from the monitor to the blue D-type socket on the REMOTE module.
2 Connect the keyboard lead to the purple mini-DIN socket on the REMOTE module.
3 Insert the keyboard lead into the green mini-DIN socket on the REMOTE module.

3.5 Twisted pair, power and serial connections

1 Insert the connector from the twisted pair cable link into the RJ-45 socket.
2 Attach the output connector of the power supply to the socket at the front edge of the REMOTE module.
3 Insert the IEC connector of the supplied power lead into the corresponding socket of the power supply.
Connect the other end of the power lead into a nearby mains socket.
4 If the serial connection to be used, attach the lead from your serial device to the 9 way male connector
on the REMOTE module.
LINDY KVM Extender C5 PRO-300 Installation and Use page 13