Audio Connections - Lindy PRO-300 User Manual

Kvm extender
Table of Contents

Advertisement

English Manual

3.6 Audio connections

Audio connections are available at the two 3.5" jack sockets mounted
on the side (same side as the switch bank) of the REMOTE module.
Note: The microphone input has a dual function whereby it can either support a mono-channel microphone or
alternatively receive stereo line input. Switch 3 on the LOCAL module controls the setting of this port: LOCAL
switch 3 OFF - microphone, LOCAL switch 3 ON - stereo line in.
1
Connect the microphone (or stereo line input) plug into the REMOTE module microphone socket.
(Note: Ensure that the setting of switch 3 on the LOCAL module matches the input to this socket:
OFF - microphone; ON – stereo line input)
2
Connect the speaker plug to the REMOTE module speaker socket.
Note: When the REMOTE module is rack mounted, the audio connections must be made
after the module has been fixed in place. Access is required to the rear and above the rack.
Remember to remove the audio connections before attempting to slide out the REMOTE
module.
LINDY KVM Extender C5 PRO-300 Installation and Use
page 14

Advertisement

Table of Contents
loading

This manual is also suitable for:

C5 pro-30039394

Table of Contents