Epson S70670 How-To Manual page 7

Turn crank until blue insert is flush
5. Unclamp the release lever that controls the pressure rollers inside the printer.
6. Unwind the roll until you have enough slack to insert the media into the printer.
Manually feed some of the paper into the printer and then release the pressure
roller release lever to keep it in place.
7. At the front of the printer grab onto the media you have loaded so far and release
the pressure roller lever again. Pull the media down across the heating bed until it
passes both rulers on the right side of the heater. Align the media with both rulers
until it is straight.
with core insert
Media guide rulers
on the heating bed Pressure roller and black bar
7