Water Trough; Appliance Surface - Miele KM 410 Operating Instructions Manual

Water trough

Let the water cool to a safe tempera-
ture to prevent burns.
Place a container of a suitable size
(a metal pot for example) under the
drain valve. Slowly open the drain
g
valve, , by turning it counterclock-
b
wise. .
Close the valve after all the water
has drained by turning the valve
c
clockwise, , until the valve can
turn no further (do not over-tighten or
jam the valve).
Make sure that the underside of the
grill is left accessible for draining
the water. Wait until the water has
cooled down before draining to
avoid the danger of being scalded.
Cleaning and care
Remove or wipe clean any residues
remaining in the reservoir. The heat-
ing element can be raised to make
this easier.
Fill the water trough with a mild solu-
tion of liqiud dish soap and warm
water, and rinse it out thoroughly.
Drain off the solution, rinse with
clean warm water and dry.

Appliance surface

Clean the ceramic surface with a soft
damp cloth and a cleaner for ceramic
surfaces. Follow the manufacturer's in-
structions on the packaging. Do not
use liquid dish soap, this can leave a
permanent blue sheen on the ceramic
surface.
Finally wipe the surface with a damp
cloth and then dry it with a clean soft
cloth.
17