Start Up
•
Make sure all the air is out of the Flex-
Liner and the VacuValve cap is properly
closed.
•
Make certain the Prime Pump/Spray
knob is in the Spray position.
10
Spray
ti23288a
Refilling FlexLiner
If sprayer runs out of paint simply separate
the cup support from the cup cover/sprayer
and refill the FlexLiner.
1.
Unplug sprayer from power source.
2.
Separate the cup support from the cup
cover/sprayer. Set the sprayer upside
down on a flat surface. This will keep the
wet paint in the cup cover.
3.
Follow steps 2 - 11 in Starting a New
Job, page 8 procedure.
ti23369a
333394F