White Balance Adjustment (Pd-168 Board) - Sony DCR-TRV940 Adjustment Manual

DCR-TRV940/TRV940E/TRV950/TRV950E

6. White Balance Adjustment (PD-168 board)

Correct the white balance.
If deviated, the LCD screen color cannot be reproduced.
Mode
Subject
Measurement Point
Measuring Instrument
Adjustment Page
Adjustment Address
Specified Value
Note 1: Check that the data of page: 0, address: 10 is "00".
Note 2: Check the white balance only when replacing the fol-
lowing parts. If necessary, adjust them.
1. LCD panel
2. Light induction plate
3. IC5701
Adjusting method:
Order Page Address Data
1 0 01
2 C 67
3 C 68
4
67
5 C
68
6 0 01
Note 3: To write in the non-volatile memory (EEPROM), press
the PAUSE button each time to set the data.
CAMERA
Not required
Check on LCD screen
C
67, 68
LCD screen must not be colored
Procedure
01
7F Press PAUSE button.
87 Press PAUSE button.
Check that the LCD screen is
not colored. If not colored,
proceed to step 6.
Change the data so that the
LCD screen is not colored.
(Note 3)
00
6-48