Important Notes - boytone BT-19DJB Operating Instructions Manual

Press this button once to play the next file, press and hold this button
SKIP UP
to fast forward through the files/tracks.
Press this button once to play the previous file, press and hold this
SKIP DOWN
button to fast reverse through the files/tracks.
TUNING KNOB Turn this knob to the right/left to search a folder backward or forward.
Press this button to toggle between USB and SD Card mode.
MODE

Important notes

 The system can detect and read files in MP3 / WMA format only via the USB port or SD
card slot.
 You can connect an MP3 player to the system via the USB socket, however, some MP3
players may not be able to play via the USB socket. This is due to variances in the
MP3 encoding format; it is not a malfunction of the system.
 There are numerous USB and SD device producers and their products vary in solution
and format. We therefore cannot guarantee that this unit will support all USB and SD
devices from every brand.
 This system supports SD cards up to 8GB.
 MP3 / WMA track format requirements:
 MP3 bit rate: 32 kbps~256 kbps; WMA bit rate: 32 kbps ~ 320 kbps.
Programming tracks for playback
Up to 64 tracks can be programmed for MP3 / WMA file playback in any order.
Before programming, however, be sure the system is in STOP mode.
1. Set the function selector to CD/ USB/SD mode, then press the stop
2. Press the program PROG button, MEM will be flashing on the LC display, and it will
indicate the program number and digits for the track number to be programmed.
3. Press the SKIP UP
4. Press the program PROG button to store the track into the memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory.
or SKIP DOWN button to select a desired track.
11
button.