Important Notes - boytone BT-27G-C Instruction Manual

SKIP UP Press this button once to play the next file, press and hold this button to fast forward
through the files/tracks.
SKIP DOWN Press this button once to play the previous file, press and hold this button to fast
reverse through the files/tracks.
TUNING KNOB Turn this knob to the right/left to search a folder backward or forward.
MODE Press this button to toggle between USB and SD Card mode.

Important notes

• The system can detect and read files in MP3 / WMA format only via the USB port or SD card
slot.
• You can connect an MP3 player to the system via the USB socket, however, some MP3 players
may not be able to play via the USB socket. This is due to variances in the MP3 encoding
format, it is not a malfunction of the system.
• There are numerous USB and SD device producers and their products vary in solution and
format. We therefore cannot guarantee that this unit will support all USB and SD devices from
every brand.
• This system supports SD cards up to 8GB.
• MP3 / WMA track format requirements:MP3 bit rate: 32 kbps~256 kbps; WMA bit rate: 32
kbps ~ 320 kbps.
Programming tracks for playback
Up to 64 tracks can be programmed for MP3 / WMA file playback in any order. Before
programming, however, be sure the system is in STOP mode.
1. Set the function selector to USB/SD mode, then press the stop button.
2. Press the program PROG button, MEM will be flashing on the LC display, and it will indicate
the program number and digits for the track number to be programmed.
3. Press the SKIP UP or SKIP DOWN button to select a desired track.
4. Press the program PROG button to store the track into the memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory.