Playing Discs - Sony RMT-D172A Service Manual

QQ
3 7 63 1515 0
6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
SCREEN SETUP
TV TYPE:
HDMI RESOLUTION:
SCREEN SAVER: 4:3 LETTER BOX
BACKGROUND:
BLACK LEVEL:
BLACK LEVEL
(COMPONENT OUT)
4:3 OUTPUT:
7
Press X/x to select the setting that
matches your TV type.
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 79)
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 79)
8
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
Is this player connected to an amplifier
(receiver)? Select the type of jack you
are using.
YES
LINE OUTPUT L/R(AUDIO)
DIGITAL OUTPUT
DIGITAL & 5.1CH OUTPUT
NO
TE
L 13942296513
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 26 to
28 ( through ). Each of these is the
B D
default setting and does not need to be
adjusted when you first connect the player.
See page 77 for using the Setup Display.
Audio Connection (pages 26 to 28)
A
• No additional settings are needed.
C-1
B-1
• Set "DOWNMIX" to "DOLBY
SURROUND" (page 83).
B-2 C-2 D-2
• Set "DOWNMIX" to "DOLBY
SURROUND" (page 83).
• Set "DIGITAL OUT" to "ON" (page 83).
D-1
• Set "DISTANCE," "LEVEL (FRONT),"
and "LEVEL (REAR)" according to the
connected speakers (page 86).
z Hints
• For connections
B-2 C-2
Set "48kHz/96kHz PCM" to "96kHz/24bit," only
if you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency
(page 84).
• For connections
B-1 C-1
If the sound distorts even when the volume is
turned down, set "AUDIO ATT" to "ON"
(page 82).
• The speaker size you set in step 14 through 18 will
also adjust the Super Audio CD speaker size of
"SPEAKER SETUP."
www
If you want to change the speaker size for Super
Audio CDs, you can set in "SPEAKER SETUP"
(page 85).
.
http://www.xiaoyu163.com
9
Press X/x to select the type of jack
(if any) you are using to connect to
an amplifier (receiver), then press
ENTER.
Choose the item that matches the audio
16:9
16:9 connection you selected on pages 25 to
28 ( through ).
A D
4:3 PAN SCAN
ON
: OFF
A
FULL
• If you connect just a TV and nothing
else, select "NO." Quick Setup is
finished and connections are complete.
B-1 C-1
• Select "LINE OUTPUT L/R
(AUDIO)." Quick Setup is finished and
connections are complete.
B-2 C-2 D-2
• Select "DIGITAL OUTPUT." The
Setup Display for "DOLBY DIGITAL"
appears.
or both and
D-1 D-1 D-2
• Select "DIGITAL & 5.1CH OUTPUT."
The Setup Display for "DOLBY
DIGITAL" appears.
10
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 26 to
28 ( through ).
B D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC: STANDARD
AUDIO FILTER:
DOWNMIX: DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
48kHz/96kHz PCM: DOLBY DIGITAL
AUDIO(HDMI):
B-2 C-2
• D-PCM (page 84)
D-2
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 84)
D-2
D-1
x ao
y
i
http://www.xiaoyu163.com
8
11
Press ENTER.
"DTS" is selected.
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO FILTER:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
48kHz/96kHz PCM:
AUDIO(HDMI):
12
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 26 to
28 (
B-2
• D-PCM (page 84)
D-2
• DTS (only if the amplifier (receiver)
has a DTS decoder) (page 84)
13
Press ENTER.
◆ When "DIGITAL OUTPUT" is selected
in step 9
• Quick Setup is finished and
connections are complete.
◆ When "DIGITAL & 5.1CH OUTPUT" is
selected in step 9
• The Setup Display for "SPEAKER
SETUP" appears.
14
Press X/x to select the size of the
OFF
center speaker.
SHARP
If no center speaker is connected, select
ON
D-PCM
"NONE" (page 85).
D-PCM
AUTO
SPEAKER SETUP(DVD)
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
TEST TONE:
Q Q
3 6 7 1 3
,
31 32

Playing Discs

Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
[/1
H
1
Turn on your TV.
2
Press [/1.
The player turns on.
3
Switch the input selector on your
TV so that the signal from the
u163
player appears on the TV screen.
◆ When using an amplifier (receiver)
.
Turn on the amplifier (receiver) and
select the appropriate channel so that you
can hear sound from the player.
33 34
1-7
2 9 9 4 2 8
15
Press ENTER.
"REAR" is selected.
SPEAKER SETUP(DVD)
OFF SIZE:
STANDARD DISTANCE:
SHARP LEVEL(FRONT) :
DOLBY SURROUND LEVEL(REAR) :
TEST TONE:
ON
FRONT:
D-PCM
D-PCM CENTER:
D-PCM REAR:
SUBWOOFER:
DTS
16
Press X/x to select the size of the
rear speakers.
If no rear speaker is connected, select
"NONE."
17
Press ENTER.
through ).
B D
"SUBWOOFER" is selected.
C-2
SPEAKER SETUP(DVD)
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
TEST TONE:
FRONT:
CENTER:
REAR:
SUBWOOFER:
T t
18
Press X/x to select whether or
not you have connected a
subwoofer.
19
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
OFF
FRONT: LARGE LARGE
SMALL
CENTER: LARGE
LARGE NONE
REAR:
SUBWOOFER: YES
1 5 0 5 8 2 9 9 4
4
Press A on the player, and place a
disc on the disc tray.
Playback side facing down
5
Press H.
The disc tray closes. The player starts
playback (continuous play). Adjust the
volume on the TV or the amplifier
A H
(receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVD
VIDEOs, see page 37. For VIDEO CDs,
see page 40.
Z
[/1
To enjoy the clarity of Super Audio CD/CD
sound more
You can minimize the effect of the video
output by switching it off.
Press VIDEO ON/OFF, so that the VIDEO
VIDEO ON/
OFF OFF indicator lights up on the player.
To cancel the setting, press VIDEO ON/OFF
again.
To turn off the player
Press [/1. The player enters standby mode.
z Hint
You can have the player turn off automatically
whenever you leave it in stop mode for more than
30 minutes.
To turn this function on or off, set "AUTO POWER
OFF" in "CUSTOM SETUP" to "ON" or "OFF."
Notes
m
• Super Audio CD audio signals are not output from
the DIGITAL OUT (COAXIAL or OPTICAL)/
HDMI OUT jacks.
• The VIDEO ON/OFF function is not effective
co
when you use the HDMI connection.
DVP-NS975V
9 9
OFF
LARGE
LARGE(REAR) LARGE
LARGE(REAR) LARGE(SIDE)
YES
OFF
LARGE
LARGE
YES
LARGE(REAR) NONE
YES
th ENTER
DISPLAY
2 8 9 9