Step 5: Connecting The Power Cord; Step 6: Quick Setup - Sony RMT-D172A Service Manual

DVP-NS975V
QQ
3 7 63 1515 0
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
C
Logic) decoder and 3 to 6 speakers
You can enjoy Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
(receiver) has a digital input jack, use
C-2
CD/DVD player
COAXIAL OPTICAL FRONT REAR CENTER R-AUDIO-L VIDEO
L 1 1
R 2 2
DIGITAL OUT
WOOFER
HDMI OUT 5.1CH OUTPUT LINE OUT
Optical digital cord
(not supplied)
C-2
Remove jack cap
before connecting
COAXIAL OPTICAL
DIGITAL OUT or
to DIGITAL OUT
(COAXIAL or OPTICAL)
Coaxial digital cord
(not supplied)
to coaxial or optical digital input
[Speakers]
Amplifier (receiver) with Dolby
Surround decoder
Rear (L) Rear (R)
Subwoofer
Center
l: Signal flow
Notes
• When connecting 6 speakers, replace the
monaural rear speaker with a center speaker, 2
rear speakers and a subwoofer.
• Super Audio CD audio signals are not output from
the DIGITAL OUT (COAXIAL or OPTICAL)/
TE
L 13942296513
HDMI OUT jacks.
: Connecting to the 5.1 ch input jacks
D-1
You can enjoy 5.1 ch surround sound using
the internal Dolby Digital, DTS, or Super
Audio CD Multi decoder of this player.
: Connecting to a digital input jack
D-2
This connection will allow you to use the
Dolby Digital, or DTS decoder function of
your AV amplifier (receiver). You are not
able to enjoy the surround sound effects of
this player.
z Hints
• For connection D-2
For correct speaker location, refer to the operating
instructions of the connected components.
• To enhance the sound performance:
– Use high-performance speakers.
– Use front, rear, and center speakers of the same
size and performance.
– Place the subwoofer between the left and right
front speakers.
Notes
For connection
D-2
• After you have completed the connection, be sure
to set "DOLBY DIGITAL" to "DOLBY
DIGITAL" and "DTS" to "DTS" in Quick Setup
(page 30).
• When you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency, set
"48kHz/96kHz PCM" in "AUDIO SETUP" to
"96kHz/24bit" (page 84).
• Super Audio CD audio signals are not output from
the DIGITAL OUT (COAXIAL or OPTICAL)/
HDMI OUT jack.
• When you connect the player to an AV amplifier
(receiver) using an HDMI cord, you will need to
do one of the following:
– Connect the AV amplifier (receiver) to the TV
with the HDMI cord.
– Connect the player to the TV with a video cord
other than HDMI cord (component video cord, S
VIDEO cord, or audio/video cord).
www
http://www.xiaoyu163.com
. If your amplifier
C-1
.
Y P B P R
CONTROL S
COMPONENT VIDEO OUT IN
S VIDEO
OUT
C-1
R-AUDIO-L VIDEO
(red)
1
or
(white) 2
LINE OUT
to LINE OUT L/R (AUDIO) 1 or 2
Stereo audio cord
(not supplied)
(white) (red)
to audio input
[Speakers]
Front (L) Front (R)
Rear (mono)
,
x ao
y
. i
http://www.xiaoyu163.com
8
Connecting to an AV amplifier (receiver) with 5.1 ch input jacks and/or a
D
digital input jack and 4 to 6 speakers
If your AV amplifier (receiver) has 5.1 channel inputs, use
If you want to use the Dolby Digital, or DTS decoder function on your AV amplifier (receiver),
connect to its digital jack using
realistic audio presence in the comfort of your own home.
CD/DVD player
COAXIAL OPTICAL FRONT
L
DIGITAL OUT R
HDMI OUT
D-2
COAXIAL OPTICAL
DIGITAL OUT
HDMI OUT
Coaxial
digital cord
(not
supplied)
or
HDMI cord
(not supplied)
to coaxial or optical/
HDMI digital input
[Speakers]
Center Subwoofer
l: Signal flow
Q Q
3 6 7 1 3
27 28

Step 5: Connecting the Power Cord

Plug the player and TV power cords into an AC outlet.

Step 6: Quick Setup

Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press >. To return to the previous adjustment, press ..
The on-screen displays differ depending on the player model. U.S./Canadian models are used
for illustration unless otherwise specified.
1
Turn on the TV.
2
Press [/1.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
"Press [ENTER] to run QUICK SETUP"
appears at the bottom of the screen. If this
message does not appear, select
"QUICK" under "SETUP" in the Control
u163
Menu to run Quick Setup (page 78).
.
29 30
1-6
2 9 9 4 2 8
.
D-1
. With the following connections, you can enjoy a more
D-2
REAR CENTER R-AUDIO-L VIDEO Y P B P R
1 1
CONTROL S
COMPONENT VIDEO OUT
2 2 IN
WOOFER
S VIDEO
5.1CH OUTPUT LINE OUT OUT
to DIGITAL OUT
(COAXIAL or OPTICAL)/
HDMI OUT
to 5.1CH
FRONT REAR
OUTPUT
L
Optical digital
cord (not
R
supplied)
Remove jack cap
before connecting
5.1CH OUTPUT
Stereo audio cord
(not supplied)
or or
Monaural audio cord
(not supplied)
to audio input
[Speakers]
AV amplifier (receiver) having
5.1 ch inputs or/and a decoder
Front (L)
Rear (L)
1 5 0 5 8 2 9
"/1
./>
X/x
ENTER
4
Press ENTER without inserting a
disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
m
SUBTITLE:
co
5
Press X/x to select a language.
The player displays the menu and
subtitles in the selected language.
9 9
D-1
CENTER
WOOFER
Front (R)
Rear (R)
9 4 2 8 9 9
ENGLISH
ENGLISH
FRENCH
SPANISH
PORTUGUESE