Getting Started; Powering Your Device - Franklin TDP-590 User Manual

Before you can use your device, you must install the batteries or plug it into a power
source. Please see "Powering Your Device" below for your options.
The first time you turn on your device, you are prompted to select the language of menu
items, prompts and other items. At the Menu Language screen, you can select between
English, Deutsch (German) and Polski (Polish). Press  or  to highlight the one you want
and then press .
Your device comes with 2 AAA batteries to power your device. You can also use a USB
cable (included) to supply power.
Installing or Replacing Your Batteries
When the power is low, you see a "low battery" notice on the screen. When you see it, it is
time to replace the batteries. Follow these easy instructions to install or replace the
batteries. Please have the new batteries at hand before you remove the old ones.
1. Turn off your device.
2. Open the battery compartment on the back of your device by pushing in the
direction of the arrow.
3. Remove the old batteries.
4. Install the new batteries following the +/- markings in
the battery compartment.
Important: Be sure that the batteries are installed
correctly. Wrong polarity may damage the unit.
5. Replace the battery cover.

Getting Started

Powering Your Device

5