Getting Started; Replacing The Battery - Franklin Collins DMQ-119 User Manual

Getting Started

The DMQ-119 uses one CR2032
Lithium battery that comes pre-
installed. Turn the device over and
gently pull the battery insulation
sheet to remove it.
Press to turn the product on.
Use a paper clip to gently press the
RESET button on the back of the
device. For more information, please
see "Resetting your Device". Warning!
Pressing the reset button with more
than light pressure may permanently
disable your unit. In addition, resetting
the unit may erase settings and
information you may have entered.

Replacing the Battery

The battery should be changed when
the screen contrast is too light even
after adjustment. Please have a
small Phillips screwdriver at hand
before you follow the steps below.