Beeper Pitch - Error; Led - Good Read; Number Of Beeps - Good Read - Honeywell Hyperion 1300G User Manual

Beeper Pitch – Error
The beeper pitch codes modify the pitch (frequency) of the sound the scanner
emits when there is a bad read or error. Default = 100 Hz.
* Razz (100 Hz)
High (4200 Hz)
LED – Good Read
The LED indicator can be programmed On or Off in response to a good read.
Default = On.
* On
Number of Beeps – Good Read
The number of beeps of a good read can be programmed from 1 - 9. The same
number of beeps will be applied to the beeper and LED in response to a good
read. For example, if you program this option to have five beeps, there will be
five beeps and five LED flashes in response to a good read. The beeps and
* Medium (2000 Hz)
Off
3 - 3