Step 5: Quick Setup - Sony DVP-SR650P Operating Instructions Manual

Step 5: Quick Setup

Follow the steps below to make the minimum
number of basic adjustments for using the
player.
To skip an adjustment, press >. To return
to the previous adjustment, press .. The
on-screen displays differ depending on the
player model.
1
Turn on the TV, then press [/1.
2
Switch the input selector on your
TV so that the signal from the
player appears on your TV screen.
"Press [ENTER] to run QUICK SETUP"
appears at the bottom of the screen. If this
message does not appear, select
"QUICK" under "SETUP" in the Control
Menu to run Quick Setup (page 20).
3
Press ENTER without inserting a
disc.
The Language Setup Display appears.
The available languages differ depending
upon the player model.
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
4
Press X/x to select a language.
The player displays the menu and
subtitles in the selected language.
5
Press ENTER.
The Screen Setup Display appears.
14
ENGLISH
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
ESPAÑOL
NEDERLANDS
PORTUGUÊS
SCREEN SETUP
TV TYPE:
COLOR SYSTEM (VIDEO CD):
SCREEN SAVER:
BACKGROUND:
PROGRESSIVE
MODE
(PROGRESSIVE)
4:3 OUTPUT:
6
Press X/x to select the setting that
matches your TV type.
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 30)
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 30)
7
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your audio
component appears.
Is this player connected to an amplifier
(receiver)? Select the type of jack you
are using.
YES
AUDIO OUTPUT(2CH)
DIGITAL OUTPUT
AUDIO OUTPUT(5.1CH)
NO
8
Press X/x to select the type of jack
(if any) you are using to connect to
an audio component, then press
ENTER.
◆ YES: AUDIO OUTPUT (2CH)
Select this when connecting an audio
component with audio L/R jacks only.
Quick Setup finishes. All connections
and setup operations are complete.
b
When you select this connection, you can
adjust only the "FRONT" settings in
"SPEAKER SETUP" (page 35). "CENTER,"
"REAR," and "SUBWOOFER" is
automatically set to "NONE."
16:9
16:9
4:3 LETTER BOX
4:3 PAN SCAN
: OFF
(COMPONENT OUT ONLY)
AUTO
:
FULL