Sony DVP-SR650P Operating Instructions Manual page 36

SUBWOOFER
(3m)
b
If each of the front or rear speakers are not placed at
an equal distance from your listening position, set
the distance according to the closest speaker.
◆ LEVEL (FRONT)
Varies the level of the front speakers. Be sure
to set "TEST TONE" to "ON" for easy
adjustment.
The default adjustments are in parentheses.
L (0 dB)
R (0 dB)
CENTRE
(0 dB)
SUBWOOFER
(0 dB)
◆ LEVEL (REAR)
Varies the level of the rear speakers. Be sure
to set "TEST TONE" to "ON" for easy
adjustment.
The default adjustments are in parentheses.
L (0 dB)
R (0 dB)
◆ TEST TONE
The speakers will emit a test tone. Use this
when you use the AUDIO OUT (5.1CH)
jacks and adjust "LEVEL (FRONT)" and
"LEVEL (REAR)."
OFF The test tone is not emitted
from the speakers.
ON The test tone is emitted from
each speaker in sequence while
adjusting level.
36
Set this within –1.6 and
+0.6 m of the "FRONT"
setting in 0.2 m increments.
For example, if "FRONT"
is set to 6 m,
"SUBWOOFER" can be
set between 4.4 and 6.6 m.
Set this between –6 dB and 0
dB in 1 dB increments.
Set this between –6 dB and 0
dB in 1 dB increments.
Set this between –12 dB and
0 dB in 1 dB increments.
Set this between –15 dB and
0 dB in 1 dB increments.
Set this between –12 dB and
0 dB in 1 dB increments.
Set this between –12 dB and
0 dB in 1 dB increments.
z
To adjust the volume of all the speakers at one time,
use the audio component's volume control.
b
The test tone signals are not output from the
DIGITAL OUT (COAXIAL) jack.