Step 5: Quick Setup; Playback; Playing Discs - Sony DVP-NS72HP Service Manual

DVP-NS72HP/NS77H/NS77HP/NS78H/NS78HP

Step 5: Quick Setup

Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press >. To return to the previous adjustment, press ..
1
Turn on the TV.
2
Press [/1.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
"Press [ENTER] to run QUICK SETUP"
(press enter to run Quick Setup) appears
at the bottom of the screen. If this
message does not appear, select
"QUICK" (quick) under "SETUP"
(setup) in the Control Menu to run Quick
Setup (page 57).
4
Press ENTER without inserting a
disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
LANGUAGE SETUP
OSD: ENGLISH
MENU:
ENGLISH
AUDIO:
FRANÇAIS
SUBTITLE:
DEUTSCH
ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA

Playback

Playing Discs

Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
Number
buttons
TIME/TEXT
CLEAR
MENU
TOP MENU
ENTER
RETURN
DISPLAY
(replay) (advance)
ZOOM
SLOW PLAY
FAST PLAY
1
Turn on your TV.
2
Press [/1.
The player turns on.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
◆ When using an audio component
Turn on the audio component and select
the appropriate channel so that you can
hear sound from the player.
ENTER
5
Press X/x to select a language.
The player displays the menu and
subtitles in the selected language.
6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
SCREEN SETUP
16:9
TV TYPE:
HDMI RESOLUTION: 16:9
JPEG RESOLUTION: 4:3 LETTER BOX
YC C /RGB (HDMI): 4:3 PAN SCAN
B R
SCREEN SAVER: ON
JACKET PICTURE
BACKGROUND:
LINE: VIDEO
4:3 OUTPUT: FULL
7
Press X/x to select the setting that
matches your TV type.
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 58)
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 58)
DANSK
,continued
4
Press A on the player, and place a
disc on the disc tray.
Playback side facing down
5
Press H.
The disc tray closes. The player starts
playback (continuous play). Adjust the
volume on the TV or the audio
component.
Depending on the disc, a menu may
appear on the TV screen. For DVD
VIDEOs, see page 27. For VIDEO CDs,
see page 28.
To turn off the player
Press [/1. The player enters standby mode.
One-Touch Play (for SCART/HDMI
connections only)
With one touch of the H button on the
remote, the player and your TV automatically
turn on and the TV's input is switched to the
player. Playback starts automatically.
The TV's input will also switch to the player
automatically, in the following cases:
– You press H, TOP MENU, MENU, or
DISPLAY buttons on the remote.
Note that these buttons are not effective
when you play audio CD or MP3 audio
track in "AUDIO (MP3)" mode.
– If a disc with auto play function is loaded.
z Hint
You can have the player turn off automatically
whenever you leave it in stop mode for more than
30 minutes. To turn this function on or off, set
"AUTO POWER OFF" in "CUSTOM SETUP" to
"ON" or "OFF" (page 60).
,continued
8
Press ENTER.
The Setup Display for selecting the type
of video signal output from the LINE
(RGB)-TV jack appears.
SCREEN SETUP
TV TYPE:
HDMI RESOLUTION:
JPEG RESOLUTION:
YC C /RGB (HDMI):
B R
SCREEN SAVER:
BACKGROUND:
LINE:
4:3 OUTPUT:
9
Press X/x to select the type of
signal you want to output from the
LINE (RGB)-TV jack.
◆ Video signals
• VIDEO (page 59)
◆ S video signals
• S VIDEO (page 59)
◆ RGB signals
• RGB (COMPONENT OFF) (page 59)
10
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your audio
component appears.
Is this player connected to an amplifier
(receiver)? Select the type of jack you
are using.
YES
LINE OUTPUT L/R(AUDIO)
DIGITAL OUTPUT
NO
11
Press X/x to select the type of
jack (if any) you are using to
connect to an audio component,
then press ENTER.
If you did not connect an audio
component, select "NO," then go to step
15.
If you connected an audio component
using just an audio cord, select "YES:
LINE OUTPUT L/R (AUDIO)," then go
to step 15.
23
24
Notes on playing DTS sound tracks on a
DVD VIDEO
• DTS audio signals are output only through
the DIGITAL OUT (COAXIAL)/HDMI
OUT jack.
• When you play a DVD VIDEO with DTS
sound tracks, set "DTS" to "ON" in
"AUDIO SETUP" (page 63).
• If you connect the player to audio
equipment without a DTS decoder, do not
set "DTS" to "ON" in "AUDIO SETUP"
(page 63). A loud noise may come out from
the speakers, affecting your ears or causing
the speakers to be damaged.
Note
Discs created on DVD recorders must be correctly
finalized before they can be played. For more
information about finalizing, refer to the operating
instructions supplied with the DVD recorder.
Additional operations
To check the position of the buttons below,
see the illustration on page 25.
To
Stop
Pause
Resume play after
pause
Go to the next chapter,
track, or scene in
continuous play mode
Go back to the
previous chapter,
track, or scene in
continuous play mode
Stop play and remove
the disc
Change the angle
Display the subtitle
Replay the previous
1
scene*
25 26
1-6
If you connected an audio component
using either digital coaxial cord/HDMI
cord, select "YES: DIGITAL OUTPUT."
12
Press X/x to select the type of
Dolby Digital signal you wish to
16:9
AUTO send to your audio component.
(1920×1080p)
HD
VIDEO
If your audio component has a Dolby
S VIDEO
Digital decoder, select "DOLBY
RGB
(COMPONENT OFF)
VIDEO
DIGITAL." Otherwise, select "D-PCM."
FULL
AUDIO SETUP
AUDIO DRC:
DOWNMIX: DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS:
48kHz/96kHz PCM:
AUDIO (HDMI):
13
Press ENTER.
"DTS" is selected.
AUDIO SETUP
AUDIO DRC:
DOWNMIX: DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS:
48kHz/96kHz PCM:
AUDIO (HDMI):
14
Press X/x to select whether or
not you wish to send a DTS signal
to your audio component.
If your audio component has a DTS
decoder, select "ON." Otherwise, select
"OFF."
15
Press ENTER.
Quick Setup is finished and connections
are complete.
If your audio component has an MPEG
audio decoder, set "MPEG" to "MPEG"
(page 63).
To Operation
Briefly fast forward Press
2
the current scene* (advance) during
playback
3
Magnify the image* Press ZOOM
repeatedly. Press
CLEAR to cancel.
1
* All DVDs except for DVD+Rs/DVD+RWs/
DVD+Rs DL. The button can be used except for
DivX video files.
2
* DVDs only. The button can be used except for
DivX video files.
3
* Video and JPEG pictures only (except
BACKGROUND pictures). You can move the
enlarged picture using C/X/x/c. Depending
upon the contents of the disc, the zoom function
may be cancelled automatically when the
picture is moved.
Note
You may not be able to use the Replay or Advance
function with some scenes.
Playing quickly or slowly with
sound
Operation
Press x You can listen to dialogue or sound while
playing the current scene quickly or slowly.
Press X
During playback, press FAST PLAY or
Press X or H
SLOW PLAY.
The speed changes when you press either
Press >
FAST PLAY or SLOW PLAY.
To return to normal playback
Press H.
Press .
Notes
• You can only use this function with DVDs,
Press Z
VIDEO CDs, or Super VCDs only.
• "Operation not possible" will appear when
maximum or minimum speed is reached.
Press (angle)
• During Fast Play and Slow Play mode, you cannot
during playback.
change angle (page 26), subtitle (page 26), and
Press (angle)
the sound (page 44). The sound can only be
repeatedly to select an
changed for VIDEO CDs/Super VCDs.
angle number.
• Fast Play and Slow Play functions do not work
when playing DTS sound tracks.
Press (subtitle)
• You cannot use Fast Play and Slow Play function
during playback.
when playing a still picture in DVD-VR mode.
Press (subtitle)
repeatedly to select a
subtitle language.
Press (replay)
during playback
STANDARD
ON
D-PCM
D-PCM
DOLBY DIGITAL
48kHz/16bit
AUTO
STANDARD
ON
D-PCM
PCM
OFF
OFF
ON