General Settings; Copier Settings - Panasonic Workio DP-2330 Operating Instructions Manual

Function

■ GENERAL SETTINGS

Screen
No.
00 Power On Default Mode
01 Manual Copy Quality Adj
02 Manual Add Toner
01/02
03 Sort Memory Status
04 Departmental Counter
09 Key Operator Mode
02/02

■ COPIER SETTINGS

Screen
No.
00 Margin Value Default
01 Edge Value Default
02 Book Value Default
01/04
03 Margin Reduction Def.
04 2-Sided Mode Default
05 N in 1 Default Mode
06 Reduce N in 1 For Space
07 Booklet Default Mag.
02/04
08 Digital Skyshot Mode
09 Manual Skyshot Mode
58
Modes
Selects mode.
● Copy, Printer, Scanner*, Fax*/Email*
Sets to activate the manual density control.
● Off, On
Adds toner manually.
● Off, On
Indicates the sorting memory status.
● Off, On
Indicates the department counter.
Input the Key Operator ID Code.
Modes
Selects the margin shift value.
● 5 mm, 10 mm, 15 mm, 20 mm
Selects the edge width.
● 5 mm, 10 mm, 15 mm, 20 mm
Selects the book void width.
● 15 mm, 20 mm, 25 mm, 30 mm
Selects the reduction ratio in margin mode.
● No, Yes
Function sets the duplex priority mode.
● No, 1 to 2, 2 to 2, Book to 2
Selects the N in 1 default mode
● 2 in 1, 4 in 1, 6 in 1
Selects whether to disable edge deletion
● No, Yes
Select the booklet magnification
● 100%, Reduce
Enables or disables the use of Skyshot mode.
● No, Normal, Quality
Enables or disables the use of Manual Skyshot. Off
● Off, M1 On, M2 On, M1&M2 On
Function
∗
When the optional Network Scanner Module/
Fax Communication Board is installed.
Function
Initial
Setting
Copy
Off
Off
Off
Consult with an
authorised service
provider
Initial
Setting
10 mm
5 mm
20 mm
No
No
2 in 1
No
Reduce
Normal