Operation Chart; Quick Operation Chart - Panasonic Workio DP-2330 Operating Instructions Manual

Getting To Know Your Machine

Operation Chart

■ Quick Operation Chart

Turn the Main
Power Switch
On
(Located on
the back of the
Copier)
Turn the Power
Switch On
(Left side of the
copier)
● Adding Paper (Paper Tray)
1
4
● Adding Paper (Sheet Bypass)
Copying on Special Paper, etc.
1
Sheet Bypass
4
Side Guides
14
1
From
ADF
or
From
Platen
Glass
Load Paper
2
Paper Weight: 60-90 g/m
NOTE:
When changing the paper size, refer to page 66.
2
Until it Stops
Adjust the side guides.
Incorrect adjustment may cause the
paper to wrinkle, misfeed or skew.
NOTE:
When paper size is not detected,
remove paper and press Reset Key.
Then, load paper again.
Face Up
Tray
Max. 50 originals ∗
Original Guides
Adjust to the original's width
Original Guides
3
Max Level Indicator
Paper Capacity: 550 Sheets (75 g/m
2
3
Load paper lower than Side Guides
Approximately up to 50
A4 size sheets / 75 g/m
Paper Weight: 55-133 g/m
2
COPY
If other function
is in use
∗
30 originals (B4/A3)
Face down
● If the original is not positioned
properly, a portion of the original
may not be copied.
● For originals smaller than A5
size, position the original within
the A5 area and select A5.
Face Down
2
2
4
2 )
4