General Settings (For Key Operator) - Panasonic Workio DP-190 Operating Instructions Manual

Function
■ General Settings
No.
00 POWER ON DEFAULT
01 SORT MEMORY USAGE
02 DEPT. COUNTER
04 TONER REPLACEMENT
05 DRUM REPLACEMENT
06 SUPPLY FORMS
09 KEY OPERATOR MODE
NOTE: When inputting above General Settings mode No., no need to input the first "0", input only the second number
of the two digit display.
The following Parameter Settings require the input of the Key Operator Password:

■ General Settings (For Key Operator)

No.
00 GENERAL LIST
01 PAPER SIZE
03 AUTO RESET TIME
04 ENERGY SAVER MODE
05 ENERGY SAVER TIME
06 LANGUAGE DEFAULT
SPECIAL TRAY 1 *
07
09 KEY/TOUCH BEEP
36
* Available only when the optional Tray-2 is installed.
Modes
Selects the default operation mode.
1:COPY / 2:FAX / 3:PRINTER / 4:SCANNER
Selects whether to display the amount of sort
memory used on the control panel.
1:OFF / 2:DISPLAY
Displays the Total Copy usage and copy limit of Consult your authorized
the selected department.
Confirms whether the Toner Cartridge is being replaced.
Selecting "1:YES" will reset the Print Counter.
1: YES / 2:NO
Confirms whether the Drum Unit is being replaced.
Selecting "1:YES" will reset the Drum Life Counter.
1:YES / 2:NO
Select whether to print the Toner Cartridge or the
Drum Unit Order Form.
1:TONER / 2:DRUM
Inputs the key operator password.
ENTER PASSWORD =
Modes
Prints the general settings list.
PRESS SET TO PRINT
Selects the Paper Tray and sets the Paper Size.
(See page 42)
1: TRAY-1 / 2:TRAY-2 (Option)
LETTER
PAPER TYPE (LETTER/A4 size only/Tray-1)
1:PLAIN / 2:OHP
Selects the Control Panel reset time.
1:OFF / 2:30 sec / 3:1 min. / 4:2 min. / 5:3 min. /
6:4 min.
Sets the Energy Saver mode and time.
1:INVALID / 2:POWER SAVER / 3:SLEEP /
4:SHUTDOWN
Power Saver mode timer: 1-240 min.
Sleep/Shutdown mode timer: 1-240 min.
Sets the energy saver timer (power saver mode) Start00:00
Start (ON): 00:00
Inputs Start and End time with Cursor Keys and
Keypad. Once you set power saver ON/OFF timer,
set timer repeats everyday.
Selects the default message language for the
display.
1:A-ENGLISH / 2:C-FRENCH / 3:SPANISH
Selects the paper tray to use for special paper.
1:NONE / 2:TRAY-1 / 3:TRAY-2 (Option) /
4:BYPASS
Selects the default touch panel sound level.
1:OFF / 2:SOFT / 3:LOUD
Function
Function
→A4 →LEGAL
End (OFF): 00:00
Initial
Setting
1:COPY
1:OFF
service provider
Initial
Setting
3:1 min.
3:SLEEP
End00:00
1:A-ENGLISH
1:NONE
2:SOFT
<to be continued>