Panasonic Workio DP-2330 Operating Instructions Manual page 65

■ COPIER SETTINGS
Screen
Modes
No.
15 Add New Tandem Desti.
16 Edit Tandem Destination
04/04
17 Delete Tandem Desti.
■ PRINTER SETTINGS
Screen
Modes
No.
00 Printer Settings Print
01 Job Completion Time
02 Page Protection
01/03
03 Error Page Print
04 Spool Function
05 Text Print
06 PS Configuration Print
07 Font List Print (PCL)
02/03
08 Font List Print (PS)
09 Mailbox Data Holding
10 Delete Mailbox Data
11 Print Queue Delete
03/03
12 AppleTalk Zone Name
● It is necessary to input the Key Operator ID Code before changing items on this page.
NOTE
∗
Functions except 0 and 11 are available when optional accessories are installed.
∗∗
When function No. 12 is set, cycle the power by turning the Power Switch OFF and ON.
Function
Inputs a new destination to split the copy job
Edits a copy destination
Deletes a copy destination
Function
Sets the printer status print.
● Stop, Start
Sets the job completion time setting.
● 1~ 999 sec.
Compress automatically then print out.
● Off, On
Sets print the error page.
● Off, On
Sets the spool function.
● Off, On
Prints text page only.
● Off, On
Sets the status page print of PS.
● Stop, Start
Sets the font list print of PCL.
● Stop, Start
Sets the font list of PS.
● Stop, Start
Sets the automatic holding function of mailbox
data.
● Infinity, 1 day, 2 days, 3 days, 4 days, 6 days,
7 days
Sets delete the mailbox data. ∗
● All, Before
Sets authorization to delete the print queue.
● Free, Key op. (operator)
Input an AppleTalk Zone name. ∗∗
● Maximum 32 characters
Initial
Setting
Initial
Setting
Start
180
Off
On
On
On
Start
Start
Start
7 days
Before
Key op.
65