Skyshot Mode; Concurrent Copying; Energy Saver (Energy Saver Mode, Sleep/Shutdown Mode) - Panasonic Workio DP-2330 Operating Instructions Manual

Hide thumbs Also See for Workio DP-2330:
Table of Contents

Advertisement

Making Copies
Other Features

■ Skyshot Mode

Skyshot allows copying a manuscript without generating dark borders even if the platen cover or ADF is opened.
Two types of Skyshot modes can be selected;
Digital Skyshot Mode : The scanning area (size) is not pre-determined.
Manual Skyshot Mode: The scanning area (size) is pre-registered into memory (M1 and M2) in advance.
Digital Skyshot Mode
NORMAL
Default setting (usually select this mode).
QUALITY ∗ ∗ ∗ ∗ ∗
For better definition, select the Quality mode.
The default setting of Digital Skyshot Mode is
"NORMAL". In this setting, the unit scans once.
If there are black areas around the borders in
the copies, set the Digital Skyshot Mode to
"QUALITY" to soften the dark borders. In this
setting, the unit scans twice.
(See page 58)

■ Concurrent Copying

Next copy job can be reserved even if the current
copy job is not completed.
(Requires the optional Hard Disk Drive and Image
Memory (See page 71) to be installed.)
1st job
2nd job
Reserve
■ Energy Saver (Power Save Mode, Sleep/Shutdown Mode)
These modes can save power while the copier is not in use.
1
Power Save Mode
Enter
Indicator
Flash : Power Save Mode
Light : Sleep/Shutdown Mode
NOTE
∗∗
54
1st job
Copy
2nd job
Sleep/Shutdown Mode ∗∗ ∗∗ ∗∗ ∗∗ ∗∗
Automatically enters the Sleep/
or
Shutdown Mode after 15 minutes
from the last copy.
Normal Operation
Power Save
Sleep
Shutdown
The machine will not go into Sleep/Shutdown Mode when the Weekly
Timer is selected.
When copying the Quality mode combined with 1
mode will be changed to "Normal" mode.
Sleep Mode/Shutdown Mode and entering timer can be selected by the key operator.
(See page 61)
● An incorrect exposure may occur when there is a black line at the edge of the original or an
image which the copier interprets as a black pattern in the skyshot mode.
1
2
Opening the
ADF
1st job
1
or
To clear
Modes
Power Consumption
Approx. 140 Wh
Approx. 28 Wh
Approx. 18 Wh
Approx. 4 Wh
2, BOOK
Number of copies
(Max. 999)
2
Select Function
2
Warm Up Time
N/A
Min. 30 sec.
35 sec.
35 sec.
2, 2PAGE, N in 1, "Quality"

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workio dp-3030

Table of Contents