Chapter 3
3.1.10.4 Removing the Upper Cover
1) Free the link stop [2] from the door link [1].
2) Remove the 2 screws [3].
[3]
[1]
F-3-45
3) Slide the upper cover [1] in the direction of the arrow.
4) Remove the 2 claws [2] of the upper cover, and detach the cover.
[1]
[2]
F-3-46
When mounting the upper cover, be sure to fit the 2 hooks [2] used to
release the fixing assembly in the 2 hook holes [1] found in the cover.
3-10
0008-3574
[2]
[2]
[1]
[1]
[2]
Bad position
Good position
F-3-47
3.1.10.5 Removing the Rear Cover
1) Slide the rear cover [1] in the direction of the arrow to detach.
[1]
F-3-48
3.1.10.6 Removing the Power Supply PCB
1) Disconnect the flat cable [1].
2) Disconnect the 4 connectors [2], and free the harness [4] from the
harness guide [3].
F-3-49
3) Disconnect the high-voltage connector [1].
4) Remove the 6 screws [2], and detach the power supply PCB [3].
[2]
0008-3575
0008-1107