Canon LBP2900 series Service Manual page 84

Chapter 3
[3]
[1]
[2]
[2]
F-3-145
3.5.3.7 Removing the Fixing Assembly
1) Remove the 3 screws [1], and detach the fixing assembly [2].
[1]
[2]
F-3-146
3.5.3.8 Removing the Fixing Film Unit
1) Free the harness [2] from the harness guide [1].
F-3-147
2) Remove the 2 screws [1], and detach the fixing cover [2].
3-30
0008-3606
[1]
0008-3611
F-3-148
3) Remove the 2 springs [1], and detach the 2 releasing levers [2].
4) Remove the 2 locking plate [3], and detach the fixing film unit [4].
F-3-149
3.5.3.9 Removing the Pressure Roller
1) Remove the claw [1] and the gear [2]; then, detach the pressure roller
[3].
F-3-150
3.5.4 Delivery Sensor
3.5.4.1 Removing the Right Cover
1) Open the delivery tray [1].
2) Open the upper cover [2].
3) Remove the screw [3].
4) Remove the 4 claws [4], and slide the right cover [5] in the direction
of the arrow.
0008-1092
0008-3594