De-Installation; De-Install; Disposal - Nedap PowerRouter Installation Manual

PowerRouter • Solar Inverter • Installation manual
8

De-installation

DANGER
To safely de-install the PowerRouter, you must follow the instructions in this chapter.
8.1

De-install

To de-install the PowerRouter:
1. Switch the PowerRouter unit OFF.
2. Switch the solar disconnect switch OFF (on the bottom of the PowerRouter).
3. Switch the AC switches OFF (grid and local out).
4. Wait at least 5 minutes, to ensure the unit is completely de-energised.
5. Disconnect the communication wires.
6. Disconnect any optional connections.
7. Disconnect the solar panel string wiring with the special tool (figure 6).
8. Disconnect the AC wires.
9. Disconnect the DC wires.
10. The PowerRouter can now be removed for disposal or repair.
DANGER
The wires from the solar panels are always energised. The voltage from a string of solar panels can
be as high as 600 V. The current can be as high as 15 A.
CAUTION
De-installation must be carried out by qualified personnel. Contact your installer/dealer.
8.2

Disposal

When the PowerRouter reached the end of its service life, or is defect beyond repair:
• Dispose of the PowerRouter according to local regulations.
• Submit the PowerRouter to a collection point for electrical and electronic waste recycling.
CAUTION
The PowerRouter must be disposed of according to local regulations.
8 De-installation
39
EN