Table of Contents
Advertisement
3
Advanced Configuration
Global Settings: If a measurement spot or box
has Use Local Parameters set to No, the Global
Settings are used in the calculation of the indicated
temperature. Select the gear icon to read and set
Global Settings.
Click Save, and then click the gear to return to the
Radiometry Setup page.
Measurement Items Summary: Select the
table icon to see a summary of all the defined
Radiometery Measurement Items.
The Alarm Id is referenced by the Alarm Manager when configuring an alarm response rule,
refer to
Alarm Manager, pg.
3-23.
Using FSM for Radiometry Setup
In FSM, the Advanced Sensors
Control panel can be used to create
the measurement items and alarm
conditions. To create a spot, click
once on the image; to create an
area, click and drag a box on the
image. Refer to the FLIR Sensors
Manager Users Manual for more
information about the radiometry
features, including the Test &
Measurement (T&M) panels that can
display temperature graphs over
time.
427-0073-12-12 Version 120
May 2015
3-13
Advertisement
Table of Contents
