Table of Contents
Advertisement
8.
To stop a ping test, click the Abort Test button.
9.
To clear the results from the display, click the Clear Results button.
Run the Traceroute Utility
To display the route and measure transit delays of packets across an IP, run the traceroute
utility.
To run a traceroute test:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type http://routerlogin.net or http://192.168.0.1.
A login screen displays.
3.
Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select ADVANCED > Administration > Diagnostics.
5.
In the Utility list, select Traceroute.
6.
Specify the following parameters for the traceroute utility:
•
Target. The IP address or host name of the computer you are tracing.
•
Max Hops. The maximum number of hops to allow when tracing the route.
•
Data Size. The input the size (in bytes) of the packet.
•
Base Port. The port number to send the packet to.
•
Resolve Host. Select On to resolve the host name to the IP address.
7.
Click the Start Test button.
Nighthawk AC1900 WiFi Cable Modem Router
Manage Your Network
82
Hide quick links:
Advertisement
Table of Contents
