D-Link DSL-1500G++ User Manual page 43

This page allows you to:
2.
Set the value and netmask of the subnet (either manually or by selecting an IP
a.
interface whose value and mask is used instead), and set the maximum and default
lease times.
Set the DHCP address range (or use a default range of 20 addresses).
b.
Set the Primary and Secondary DNS Server addresses or set your System to give out
c.
its own IP address as the DNS Server address.
Set your Router to give out its own IP address as the default Gateway address.
d.
Once you have entered new configuration details for your DHCP server, click on
3.
The DHCP Server page is displayed, containing details of your new subnet.
Editing a DHCP subnet
Click on the Advanced Options link for a specific subnet. The Edit DHCP server subnet
1.
page is displayed. This allows you to edit all of the values that were set when the
subnet was created.
DSL-1500G++ User Manual
- 43 -
.