D-Link DSL-1500G++ User Manual page 21

DSL-1500G++ User Manual
On each PC to which you want to assign static information, follow the instructions on
pages 8 through 11 relating only to checking for and/or installing the IP protocol. Once it is
installed, continue to follow the instructions for displaying each of the Internet Protocol
(TCP/IP) properties. Instead of enabling dynamic assignment of the IP addresses for the
computer, DNS server and default gateway, click the radio buttons that enable you to enter
the information manually.
Note: Your PCs must have IP addresses that place them in the same subnet as the G.SHDSL
Router's LAN port. If you manually assign IP information to all your LAN PCs, you can follow
the LAN Connections to change the LAN port IP address accordingly.
- 21 -