Windows 95, 98 Pcs - D-Link DSL-1500G++ User Manual

click
6. Select Microsoft in the Manufacturers box.
7. Select Internet Protocol (TCP/IP) in the Network Protocols list, and then
click
You may be prompted to install files from your Windows Me installation CD or other
media. Follow the instructions to install the files.
8. If prompted, click
Next, configure the PCs to accept IP information assigned by the Router.
9. In the Control Panel, double-click the Network and Dial-up Connections icon.
10. In Network and Dial-up Connections window, right-click the Network icon, and then
select Properties.
11. In the Network Properties dialog box, select TCP/IP, and then click
12. In the TCP/IP Settings dialog box, click the radio button labeled Server assigned IP
address. Also click the radio button labeled Server assigned name server address.
13. Click
Panel.

Windows 95, 98 PCs

First, check for the IP protocol and, if necessary, install it:
1. In the Windows task bar, click the Start button, point to Settings, and then click
Control Panel.
2. Double-click the Network icon.
The Network dialog box displays with a list of currently installed network components.
If the list includes TCP/IP, and then the protocol has already been enabled. Skip to
step 9.
3. If TCP/IP does not display as an installed component, click
The Select Network Component Type dialog box displays.
4. Select Protocol, and then click
The Select Network Protocol dialog box displays.
5. Click on Microsoft in the Manufacturers list box, and then click TCP/IP in the Network
Protocols list box.
6. Click
again.
You may be prompted to install files from your Windows 95/98 installation CD. Follow
DSL-1500G++ User Manual
.
.
to restart your computer with the new settings.
twice to confirm and save your changes, and then close the Control
to return to the Network dialog box, and then click
- 19 -
.
.
.