Configure The Dsl-1500G++ From Emweb; Accessing Emweb; About Emweb Pages - D-Link DSL-1500G++ User Manual

2 mbps g.shdsl leased line router

Hide thumbs Also See for DSL-1500G++:

Table of Contents

3. Configure the DSL-1500G++ from EmWeb

To access EmWeb on the DSL-1500G++ that has been booted with an image containing a

factory default configuration:

1. Attach a PC to one of the LAN interfaces. At your web browser, enter the

URL:http://192.168.1.1

2. If you first time login the EmWeb, you will see a login box is displayed. You must enter

your username and password to access the pages. The default User name/Password as

follows

User Name: admin

Password: admin

3. Click on

The first time that EmWeb is launched during a session, a Welcome message is displayed

at the top of the Status homepage. This message is replaced by the Status heading once

the page is automatically or manually refreshed.

EmWeb provides a series of web pages that you can use to setup and configure the

DSL-1500G++. These pages are organized into four main topics.

DSL-1500G++ User Manual

. You are now ready to configure DSL-1500G++ using EmWeb.

- 22 -

Table of Contents

Show Quick Links

Table of Contents