Table of Contents
Advertisement
General Safety Instructions and Practices
A safe and careful operator is the best operator.
should be to the owner/operator.
surroundings, and observing certain precautions.
Messages that, if followed, will help protect the operator and bystanders from injury or death.
understand these Safety Messages before assembling, operating or servicing this Implement.
equipment should only be operated by those persons who have read the Manual, who are responsible and
trained, and who know how to do so safely and responsibly.
The Safety Alert Symbol combined with a Signal Word, as seen below, is used throughout this manual and on
decals which are attached to the equipment. The Safety Alert Symbol means: "ATTENTION! BECOME
ALERT! YOUR SAFETY IS INVOLVED!" The Symbol and Signal Word are intended to warn the owner/
operator of impending hazards and the degree of possible injury faced when operating this equipment.
Practice all usual and customary safe working precautions and above all---remember safety is
up to YOU.
Only YOU can prevent serious injury or death from unsafe practices.
The lowest level of Safety Message; warns of possible injury. Decals located on the Equipment
with this Signal Word are Black and Yellow
Serious injury or possible death! Decals are Black and Orange.
Imminent death/critical injury. Decals are Red and White.
READ, UNDERSTAND, and FOLLOW the following Safety Messages. Serious injury or
death may occur unless care is taken to follow the warnings and instructions stated in the
Safety Messages. Always use good common sense to avoid hazards.
Si no lee ingles, pida ayuda a alguien que si lo lea para que le traduzca las
medidas de seguridad.
MACHETE BOOM 01/05
© 2005 Alamo Group Inc.
SAFETY
Safety is of primary importance to the manufacturer and
Most accidents can be avoided by being aware of your equipment, your
The first section of this manual includes a list of Safety
(SG-3)
Safety Section 1-2
(SG-1)
(SG-2)
Read and
This
Advertisement
Table of Contents
