Specifications; Product Identification; Engine; Cutting Units - Jacobsen Tri King 67043 Parts & Maintenance Manual

2

SPECIFICATIONS

2 SPECIFICATIONS
2.1

PRODUCT IDENTIFICATION _________________________________________________

67043 .............................. Tri-King 1900D Mower, 3-WD,
Serial Number ................ An identification plate, like the one
2.2

ENGINE__________________________________________________________________

Make ............................... Kubota
Model .............................. D662-E
Horsepower..................... 18.5 hp (13.9 kW) @3600 rpm
Note: Actual sustained horsepower will likely be lower
than listed in specifications due to operating limitations
and environmental factors
Displacement .................. 40.03 cu. in. (656 cc)
Torque ............................. 26 ft. lbs. (35 Nm) @ 2600 rpm
Fuel:
Type .......................... No. 2 Diesel
Rating ....................... Min. Cetane rating 45
Capacity.................... 6.5 U.S. Gal. (24.6 liters)
2.3

CUTTING UNITS: __________________________________________________________

Reel ................................ 3 Reels, 26 in. (660 mm) wide or,
Reel Diameter................. 7 in. (178 mm)
Bearings.......................... Self adjusting tapered roller
Blade Options ................. 7 blades
Cutting Width:
2.4

MOWER _________________________________________________________________

Tires:
Front ......................... 20 x 10 - 10 tubeless
Rear ......................... 20 x 10 - 8 tubeless
Pressure:
Front.......................... 10-12 psi (69-83 kPa)
Rear .......................... 8-10 psi (55-69 kPa)
Battery:
Type .......................... 12 Volt Lead/Acid
Group ........................ 22 NF
Parking Brake ................. Mechanical front wheel disk
6
18.5 hp diesel engine with ROPS.
Without front lift arms, mowers or
battery.
shown, listing the serial number, is
attached to the frame of the
mower and is located to the
operator's left just behind the front
wheel motor. Always provide the
serial number of the unit when
ordering replacement parts or
requesting service information.
3 Reels, 30 in. (762 mm) wide.
bearings
Hand lever actuated
CHARLOTTE, NC
YEAR OF
PRODUCTION:
67043
Sound Pressure
EEC Sound
Product
Power
67043 101 dba
Governor......................... Ball Type Governor
Low Idle ................... 1100 RPM
High Idle ................... 3400 RPM
Lubrication:
Capacity.................... 3.4 quarts (3.2 liter) with filter
Type .......................... SAE 20W, SAE 30W
API Classification ..... CD, CE
Air Filter .......................... Dry type with evacuator valve and
Alternator........................ 40 amp
26 in. Reels............... 72 in. (1828 mm)
30 in. Reels............... 84 in. (2134 mm)
Overall Width:
26 in. Reels............... 78.5 in. (1994 mm)
30 in. Reels............... 90.5 in. (2298 mm)
Cutting Frequency:
7 Blade ..................... 0.151 in./mph (3.8 mm/kph)
Speed:
Mow ......................... 0 - 5 mph (8 kph)
Transport ................. 0 - 8.5 mph (13.7 kph)
Reverse .................... 0 - 2.3 mph (3.7 kph)
Hydraulic System:
Capacity.......................... 5.5 U.S. gal. (20.8 liters) System
Fluid Type ....................... GreensCare 68 Biodegradable
Charge Filter................... 10 micron
Return Line Filter............ 10 micron
Steering ......................... Hydrostatic power steering
®
A Textron Company
MADE IN U.S.A.
1601
Vibration M/S
Level
Arms
Operator Ear
87 dba 1.4
service indicator.
2
Body
<0.08