Page 1
1 - I N C L U D E S I T E M S 3 - 1 6 Parts & Maintenance Manual Tri King Triplex Mower ® 67042 – 1800G Briggs Vanguard Engine 67043 – 1900D Kubota D662-EB Engine...
To Order Parts 1. Write your full name and complete address on the 5. Send or bring the order to an authorized Jacobsen order. Dealer. 2. Explain where and how to make shipment. 6. Inspect all shipments on receipt. If any parts are dam- aged or missing, file a claim with the carrier before 3.
Suggested Stocking Guide To Keep your Equipment fully operational and productive, Jacobsen suggests you maintain a stock of the more commonly used maintenance items. We have included part numbers for additional support materials and training aids. To order any of the following material: ❑...
19. Local regulations may restrict the age of the operator. the job. Only use accessories and attachments approved by Jacobsen. 20. Never use your hands to search for oil leaks. Hydraulic fluid under pressure can penetrate the skin and cause Stay alert for holes in the terrain and other hidden serious injury.
Adjustments and maintenance should always be performed by a qualified technician. If additional information or service is needed, contact your Authorized Jacobsen Dealer who is kept informed of the latest methods to service this equipment and can provide prompt and efficient service. Use of other than original or...
SPECIFICATIONS SPECIFICATIONS PRODUCT IDENTIFICATION_________________________________________________ 67042......Tri-King 1800G Tractor, 3-WD, 18 hp gasoline engine. Without ® front lift arms, mowers or battery. A Textron Company 67043......Tri-King 1900D Tractor, 3-WD, CHARLOTTE, NC MADE IN U.S.A. 18.5 hp diesel engine. Without YEAR OF PRODUCTION: front lift arms, mowers or battery.
ACCESSORIES & SUPPORT LITERATURE _____________________________________ Contact your area Jacobsen Dealer for a complete listing of accessories and attachments. CAUTION Use of other than Jacobsen authorized parts and accessories may cause personal injury or damage to the equipment and will void the warranty Accesories Rollers Air Blow Gun ............JAC5098...
ADJUSTMENTS ADJUSTMENTS GENERAL________________________________________________________________ adjustment cannot be made, contact an authorized WARNING Jacobsen Dealer. 2. Replace, adjust, worn damaged To prevent injury, lower implements to the ground, components. disengage all drives, engage parking brake, stop engine and remove key from ignition switch before making any 3.
ADJUSTMENTS NEUTRAL AND 3WD SWITCHES _____________________________________________ 1. Check traction pedal adjustment. 2. Use a volt/ohm meter to determine when switch opens or closes. a. Adjust switch (G) so “finger” of actuating arm (F) is centered over sensing portion of switch. Switch contacts should be closed with traction pedal in neutral and open with minimal pedal travel in forward or reverse direction.
ADJUSTMENTS TRACTION PEDAL NEUTRAL _______________________________________________ 1. If the tractor “creeps” in either direction when the a. Lock rear nuts and adjust front nuts (N) to engine is running but the traction pedal is not maintain 3/8 in. (9 mm) of extension in spring depressed, adjust spring tension so that the pedal (O).
4. To maintain a consistent height of cut, the down Figure 3J pressure should be adjusted evenly on all three mowers. 5. Jacobsen, recommends the mower weight for “Floating” mode at 60 lb. (27 kg), and for “Fixed” mode at 90 lb. (41 kg). Figure 3K...
ADJUSTMENTS 3.13 REEL TO BEDKNIFE _______________________________________________________ (Pre-adjustment Check) maintained across the entire length of the reel and bedknife. Check the reel bearings for end play or radial play. If The reel must be parallel to the bedknife. An there is any abnormal movement of the reel, up and improperly adjusted reel will lose its sharp edges down or side to side, adjust or replace components as prematurely and may result in serious damage to the...
1. Raise and lock the lift arms in transport mode. 2. For easier access to the height adjusters on the motor end of the front reels, Jacobsen recommends Tether raising the front end of the tractor just a few inches...
ADJUSTMENTS 3.17 REMOVING THE CUTTING UNIT _____________________________________________ 1. To prevent contamination of the hydraulic system, as 4. Remove hardware securing motor to drive housing well as loss of oil, do not disconnect the hoses from and carefully pull the motor away. the motor.
ADJUSTMENTS 3.19 CUTTING HEIGHT - FLOATING MODE _________________________________________ Follow the procedures outlined in Section 3.16. 1. Assemble the front roller adjuster (B) to holes num- ber 2 and 4 only of the mower frame. Do not use hole numbers 1 and 3. Refer to the chart below for correct hole of front roller adjuster to use.
All torque values included in these charts are approximate and are for reference only. Use of these torque values is at your sole risk. Jacobsen is not responsible for any loss, claim, or damage arising from the use of these charts.
If proper adjustments Use the illustrations in the Parts Catalog as reference cannot be made, contact an Authorized Jacobsen for the disassembly and reassembly of components. Dealer. Recycle or dispose of all hazardous materials Inspect the equipment on a regular basis, establish a (batteries, fuel, lubricants, anti-freeze, etc.) according...
MAINTENANCE ENGINE OIL ______________________________________________________________ Check the engine oil at the start of each day, before starting the engine. If the oil level is low, remove oil filler cap and add oil as required. Diesel Engine Dipstick Diesel Engine: Safe Operating Range Perform initial oil change after first 50 hours of operation and every 100 hours thereafter.
MAINTENANCE DIESEL AIR FILTER ________________________________________________________ Check the service indicator daily. If red band appears in the Reassemble cap making sure it seals completely window (C) replace the element. around the filter housing. Dust evacuator (E) must be facing down. Do not remove the element for inspection or cleaning. Check all hoses and air ducts.
MAINTENANCE BATTERY ________________________________________________________________ Make absolutely certain the ignition switch is “Off” and the When installing the battery, always assemble the RED, positive (+) battery cable first and the ground, BLACK, key has been removed before servicing the battery. negative (-) cable last. When removing the battery, always remove the CAUTION ground, BLACK, negative (-) cable first and the RED,...
Fluid. The hydraulic reservoir on this machine is filled with Purge air from system. Jacobsen Greens Care 68 Biodegradable fluid. Operate all tractor functions for about 5 minutes to Drain and replace the hydraulic oil after a major component purge air out of the system and stabilize the oil failure, or if you notice the presence of water or foam in the level.
If the operator backup does not function properly and the problem cannot be corrected, contact an authorized CAUTION Jacobsen Dealer. Keep the wire harness and all individual wires away Always turn the ignition switch off and remove the from moving parts to prevent damage.
If you have to add coolant more than once a month, or add Install cap and tighten securely. more than one quart at a time, have a authorized Jacobsen Dealer check the cooling system. Check coolant level daily. Radiator should be full and...
MAINTENANCE 4.20 BACKLAPPING ___________________________________________________________ Turn nut (A) on the reel to be backlapped so the reel WARNING turns in reverse. Adjust the reel speed to 100-150 RPM. To prevent injury, keep hands, feet and clothing away Apply lapping compound with a long handle brush from rotating reels.
See your local fuel exhaust fumes can be fatal when inhaled. supplier. Gas Engine - For engine protection Jacobsen recommends the use of a fuel additive such as STABIL ®. Mix additive following instructions on container. Run engine for a short time to circulate additive through carburetor.
TROUBLESHOOTING TROUBLESHOOTING GENERAL________________________________________________________________ The troubleshooting chart below lists basic problems that may occur during start-up and operation. For more detailed information regarding the hydraulic and electrical systems contact your area Jacobsen Dealer. Symptoms Possible Causes Action Engine will not start.
MAINTENANCE & LUBRICATION CHARTS MAINTENANCE & LUBRICATION CHARTS GENERAL ________________________________________________________________ 2. Lubricate with grease that meets or exceeds NLGI WARNING Grade 2 LB specifications. Apply grease with a manual grease gun and fill slowly until grease begins Before you clean, adjust, or repair this equipment, to seep out.
1. Install the battery with terminals toward rear. 2. Secure battery to support. OPERATION 3. Connect positive (+) (red) FIRST. READ MANUAL BEFORE OPERATING. MANUALS AVAILABLE FROM: JACOBSEN/TEXTRON, RACINE WI. 4. Connect negative (–) (black) LAST. To Start To Mow Parking Brake To use jumper cablee: 1.
TRI-KING Serial No. All 2.1 Hood and Cowlings 16 / 17...
Page 33
TRI-KING Item Part No. Qty. Description Serial Numbers/Notes 2810411 1 Left Foot Rest 2810412 1 Right Foot Rest 2810413 1 Right Foot Rest Diesel 400260 12 Screw, 3/8-16 x 7/8” Hex Head 445796 12 Nut, 3/8-16 Spiralock Flange 3002803 1 Left Hand Transition 3002804 1 Right Hand Transition 403770...
TRI-KING Serial No. All 23.1 Hydro Pump and Charge Filter...
Page 77
Item Part No. Qty. Description Serial Numbers/Notes > 4120764 1 Hydraulic Pump Gas, SN 67042 All, See 38.1 > 4120764 1 Hydraulic Pump Diesel, SN 67043-1601 ~ 4250, See 38.1 > 4129590 1 Hydraulic Pump Diesel, SN 67043 4251 and Up, See 38.1 340070 1 Adapter, 90°...
TRI-KING Serial No. All 26.1 Traction Hydraulics Rear View of Hydraulic Pump...
Page 83
TRI-KING Item Part No. Qty. Description Serial Numbers/Notes 1002045 Tube, Pump to Motor 2810603 Tube, Pump to Motor Diesel 1002046 Tube, Pump to Motor 2810604 Tube, Pump to Motor Diesel 1001370 Tube, R. Motor to L. Motor 2810602 Tube, R. Motor to L. Motor Diesel 1001369 Tube, R.
Page 87
TRI-KING Item Part No. Qty. Description Serial Numbers/Notes 473142 Nylon Tie 400120 Screw, 1/4-20 x 2” Hex Hd 444708 Locknut, 1/4-20 Center 3003323.7 Bracket 1001491 Center Reel Motor Return Hose 1001490 Right Reel Motor Return Hose 1001489 Left Reel Motor Return Hose 1001493 Center Reel Motor Pressure Hose 1001494...
TRI-KING Serial No. All 30.1 Reels Mower Frame Bedknife Backing Tube Bedknife Shaft Reel Rear Roller Assembly Rear Roller Location Product Size In No. of Bedknife Reel Mower Bedknife Number Inches Blades Backing Part No. Frame Complete Tube Shaft Left Center Right >...
TRI-KING Serial No. All 31.1 Roller Brackets and Skids 18/19 20/21 Item Part No. Qty. Description Serial Numbers/Notes Rear Roller 3005156 • Wear Sleeve 3004882 • Oil Seal 338647 • Oil Seal 500534 • Bearing, Cup and Cone 367029 • Nut 471214 •...
TRI-KING Serial No. All 33.1 Shields and Center Pivot Arm 15/16 22/23...
Page 97
TRI-KING Item Part No. Qty. Description Serial Numbers/Notes 4113759 Center Pivot Arm 67116 Only 4113756 Center Pivot Arm 67125 Only 364140 • Bushing 338561 Reel Pivot Bracket 338562 Reel Pivot Bracket 366827 Pivot Spacer 400442 Screw, 1/2-20 x 1-1/2” Hex Head 452012 Flat Washer, 1/2 445789...
TRI-KING Serial No. All 34.1 Side Pivot and Lift Arms 26" Reels 11/12 30" Reels 13/14 2/15...
Page 99
TRI-KING Item Part No. Qty. Description Serial Numbers/Notes 4113757 Right Pivot Arm 67115 Only 4113754 Right Pivot Arm 67124 Only 364156 • Bushing 4113758 Left Pivot Arm 67114 Only 4113755 Left Pivot Arm 67123 Only 400260 Screw, 3/8-16 x 7/8” Hex Head 446142 Lockwasher, 3/8 Hvy 364781...
TRI-KING Serial No. All 35.1 Down Pressure Kit Optional Kit Item Part No. Qty. Description Serial Numbers/Notes 1002588 Down Pressure Kit 400268 • Screw, 3/8-16 x 1-3/4” 366974 • Rod End 364328 • Spacer 443812 • Nut, 3/8-24 347935 • Washer - Special 460312 •...
TRI-KING Serial No. All 36.1 Reel Pump Part No. 1000970 Item Part No. Qty. Description Serial Numbers/Notes Shear Pin (Included in A) Snap Ring (Included in A) Oil Seal (Included in A) 5001435 Driveshaft Seal Plate (Included in A) 590286 Alignment Pin 5001437 Drive Key...
TRI-KING Serial No. All 39.1 3WD Valve Part No. 4111942 2/3/5 Item Part No. Qty. Description Serial Numbers/Notes 4113025 Check Valve 4113026 Spool Valve 4113027 Solenoid Coil Reference K6 5003578 Seal Kit, Check Valve 5003579 Seal Kit, Spool Valve 5002157 Port Plug 5001065 Port Plug...
TRI-KING Serial No. All 40.1 Brake Calipers Part No. 1001634 L.H. Part No. 1001635 R.H. Item Part No. Qty. Description Serial Numbers/Notes R.H. L.H. 557823 Pivot Pin 503660 Carrier Side Pad 557824 Pad Support 557825 Lever Retainer Spring 557826 Pad Support 503660 Cam Side Pad >...
TRI-KING Serial No. All 42.1 Hydraulic Schematic Reel Motors Filter Center Right Left Electric Clutch Rear Wheel Motor Tank 5.5 Gals. in System Valve Right Wheel Motor Left Wheel Motor Steering Cylinder Lift Valve Engine Steering Valve Direct Traction Pump Drive 3400 RPM Lift...
Page 111
* Refer to the Operator’s manual or the Parts & Maintenance Manual for the correct hydraulic oil requirements for your machine. Jacobsen offers a High Usage Parts Catalog illustrating commonly used Parts through easy to read line Drawings. See your local Jacobsen Dealer for a copy.
TRI-KING Serial No. All 43.1 O-Ring Chart O-Ring Face O-Ring Boss O-Ring Face O-Ring Face O-Ring Boss O-Ring Boss Seal Size Dash Size Seal Size Seal Size Dash Size Dash Size W-X-Y W-X-Y W-X-Y O-Ring Face O-Ring Not O-Ring Face O-Ring Boss O-Ring Face O-Ring Not...
Page 117
1.1 .................Decals..................... 30 2.1 .................Hood and Cowlings................32 3.1 .................Seat and Base..................34 3.2 .................Seat and Base..................36 4.1 .................Dash Installation..................38 5.1 .................Instrument Panel ................... 40 6.1 .................Hydro Control Linkage................42 7.1 .................Front Motors and Brakes ..............44 8.1 .................Parking Brake, Neutral Start and 3WD Switches........ 46 9.1 .................Fuel Control ...................
Page 118
Equipment from Jacobsen is built to exacting standards ensured by ISO 9001 and ISO 14001 registration at all of our manufacturing locations. A worldwide dealer network and factory trained technicians backed by Textron Parts Xpress provide reliable, high-quality product support.
Need help?
Do you have a question about the 67042 and is the answer not in the manual?
Questions and answers