Run A Printer Cleaning Card - DataCard SD160 User Manual

Run a Printer Cleaning Card

Run a cleaning card to clean debris from the inside of the printer and from the hopper rollers. The
cleaning card can remove most contaminants from the printer. Run a cleaning card after every
250 cards processed by the printer, or every 6 months.
1.
Prepare the printer for cleaning.
a.
Power on the printer.
b.
Open the printer cover and remove the print ribbon
cartridge.
c.
Close the cover.
d.
Open the input hopper and remove any unprinted
cards.
e.
Open the cleaning card package and remove the
cleaning card.
f.
Load the cleaning card in the input hopper. (Plan to
clean the printer immediately. The cleaning card dries
out if it is out of its package for more than a few
minutes.)
To insert the cleaning card manually, wait until you
are prompted.
28 System Maintenance