System Q; Volume; Audio Control; Adjusting The Detail Of Audio Control - Kenwood DPX-MP4090 Instruction Manual

General features

System Q

Selecting the best sound setting preset for
different types of music.
1
Select the source to set
Press the [SRC] button.
2
Select the Sound type
Press the [Q] button.
Each time you press the button, the sound
setting alternates.
Sound setting
Natural
User memory
Rock
Pops
Easy
Top 40
Jazz
• User memory: The values set on the <Audio Control>
(page 8).
• Change each setting value with the <Speaker
Setting> (page 10).
First, select the speaker type with the Speaker setting.

Audio Control

1
Select the source to adjust
Press the [SRC] button.
2
Enter Audio Control mode
Press the [VOL] knob.
"AUD mode" is displayed.
3
Select the Audio item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
4
Adjust the Audio item
Turn the [VOL] knob.
Adjustment Item Display
1
Rear Volume * "R-VOL"
Subwoofer level* 2 "SubW"
3
Bass level* "BasLV"
3
Middle level* "MidLV"
8
|
English
Display
"NATURAL"
"USER"
"ROCK"
"POPS"
"EASY"
"TOP40"
"JAZZ"
Range
0 — 35
–15 — +15
–8 — +8
–8 — +8
Treble level* 3 "TreLV"
Balance "BAL"
Fader "FAD"
Exit Audio Control mode (Volume control mode)
* 1 You can control this item when "2ZON" of <Audio
Setup> (page 9) is set to "ON".
2
* • You can control this item when <Switching preout>
(page 24) is set to "SWPRE SW".
• You can control this item when <Subwoofer Output>
(page 11) is set to "SubW ON".
• You can control this item when "2ZON" of <Audio
Setup> (page 9) is set to "OFF".
* 3 You can adjust these items in detail. Refer to
<Adjusting the detail of Audio Control>(Page8)
5
Exit Audio Control mode
Press any button.
Press a button other than the [VOL] knob, [SRC],
[0] and [ATT] button.
Adjusting the detail of Audio
Control
Among the Basic Audio items, you can adjust the
Bass level, Middle level, and Treble level in detail.
1
Select the Basic Audio item
Select the desired item to be set in detail from
followings;
• Bass level
• Middle level
• Treble level
For how to select Basic Audio items, see <Audio
Control> (page 8).
2
Enter Detail adjustment mode of Audio
Control
Press the [VOL] knob for at least 1 second.
3
Select the Detail Audio item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
–8 — +8
Left 15 — Right 15
Rear 15 — Front 15