Installing The Printer - Epson TM-C7500 series Technical Reference Manual

Installing the Printer

Secure sufficient space in a location appropriate for installation.
 Two people are required to lift up this product.
CAUTION
 The weight of this product is approximately 37 kg {81.57 lb}. When lifting up this product,
 Lift up this product in a natural posture, for example, bending your knees a sufficient
 Do not tilt the product more than 10 degrees in any direction while carrying it. Doing so may
 When transporting this printer, do not put it upside down or topple over sideways.
 Do not place anything that weighs more than 10 kg on top of the printer. The printer may be
 Do not install the printer at a high location where it may fall during operations.
 Do not install the printer at a location that is subject to vibration or impact. Make sure that
 While installing the printer, make sure that no cords or foreign objects are tucked under the
 Be careful not to apply a strong impact to the printer during operations or processing as it
38
place the product between two people as shown in the figure below and hold the recessed
areas on both sides of the product. Carrying the product by holding other areas may
damage the product. When placing the product on the floor, be careful not to get your
fingers caught between the product and the installation surface.
amount. Lifting the product in an inappropriate posture may cause injury to the worker or
damage to the product.
cause an accident.
damaged if an excessive force is applied.
the printer is installed at a location that is not subject to vibration or impact during
operations. If vibration or impact was applied to the printer during operations, nozzle
verification may be performed repeatedly to avoid malfunction of the Nozzle Verification
Technology. When nozzle verification is performed repeatedly, it may take longer to process
the operations and throughput may decline.
printer.
may affect printing.