Warning Processing - Epson TM-C7500 series Technical Reference Manual

LCD display
Error
PRINTER ERROR ##
(##: 01 to 0A, 16 to 18,
26, 27,2A, 31 to 37
41 to 47, 56 to 58, 62,
63, C1 to C4, C6 to C8,
D6 to DB)
SERVICE REQD. ##
(##: F0 to F4)
Service required

Warning Processing

LCD display
Warning type
INK LOW
Ink cartridge low
M/B NEAR FULL
Maintenance box near full
NOZZLE CLOGGED
Print head nozzle clogged
Description
Paper jam
Poor autocutter operation
Irregular ambient temperature
Malfunction
The product is beyond its
service life.
Malfunction
Description
Ink is running low.
The maintenance box is
almost full.
Nozzle is clogged.
Recovery method
The printer will not recover until you perform
the proper processing, then turn the power
on again.
1. Turn the power off.
2. Open the paper set cover.
3.Open the front cover.
If you cannot open the front cover, the
cutter blade may be locked. Turn this
product's power off and on again.
4. Remove all the paper that is in the paper
path.
5. Close the front cover.
6. Turn the power back on.
(If the error occurs again, request a
repair.)
7. Run auto loading of the paper.
Request a repair.
Recovery method
Because it is almost time to replace the ink
cartridge, prepare an ink cartridge for
replacement. When the status changes to
"Replace ink cartridge", replace the ink
cartridge.
Because it is almost time to replace the
maintenance box, prepare a maintenance
box for replacement. When the status
changes to "Replace maintenance box",
replace the maintenance box.
Check the printing result and perform head
cleaning. Execute manual head cleaning
from [Cleaning] on the unit panel.
Check the printing result, and if the nozzle
clog cannot be permitted, perform repairs.
Chapter 3 Handling
155
3