Paper Specifications - Epson TM-C7500 series Technical Reference Manual

Paper Specifications

The following is the type and the size of paper specified for this printer.
 When using paper other than the specified, users must evaluate the recognition rate in
 Depending on the temperature and humidity, the synthetic labels and paper backing have
 Do not use the paper which is extended by connecting with tape and others. The paper may
• TM-C7500
Paper type
Full-page label (Black mark)
Die-cut label(Gap)
Die-cut label (Black mark)
180
advance to avoid deterioration of the paper feed accuracy/barcode recognition rate/print
quality and frequent occurrence of paper jams.
different ratios of expansion and contraction, and this causes the paper to curl. If the paper
curls, the paper may be rubbed by the print head and become contaminated, or the paper
may jam.
be detected incorrectly by the connected line, and rubbed by the print head and become
contaminated, or the paper may jam.
Category
Plain label
Matte label
Synthetic label
Plain label
Matte label
Synthetic label
Plain label
Matte label
Synthetic label
Form
50 mm to 112 mm 
Roll paper
{1.97 to 4.41"}
(Backing paper width)
46 to 108 mm 
{1.81 to 4.25"}
(Label width)
50 mm to 112 mm 
Roll paper
{1.97 to 4.41"}
(Backing paper width)
46 to 108 mm 
{1.81 to 4.25"}
(Label width)
50 mm to 112 mm 
Roll paper
{1.97 to 4.41"}
Fanfold paper
(Backing paper width)
46 to 108 mm 
{1.81 to 4.25"}
(Label width)
Width