Installing the Printer
You can install the printer horizontally on a flat surface (with the paper exit on top) or vertically
(with the paper exit at the front). Also, you can hang it on a wall using the included accessories.
Horizontal installation
You can use the paper near-end sensor only when you install the printer horizontally.
Take measures to prevent the printer from moving by vibration during paper cutting and
Do not place the printer in dusty locations.
Do not knock or strike the printer. This may cause defective print.
Do not catch cables or foreign matter under the printer.
34
Vertical installation
When you install the printer vertically or hang it on a wall, be sure to disable the setting.
Otherwise false detection occur. For information about the paper near-end sensor, see
"Adjusting the Paper Near-End Sensor" on page
when using a drawer. Affixing tape (Model: DF-10) is provided as an option.
Hanging on a wall
39.