Preset Programmes; Before You Start - Danfoss FP735Si User Manual

1.2 Preset Programmes

Your FP735Si comes ready programmed with a set of operating times
which often suit most people.
Weekdays (Mon-Fri)
Event Time
1 06:30
2 08:30
3 11:30
4 13:30
5 16:30
6 22:30
If you want, you can change any of these settings by following the
instructions on pages 12 to 17. First follow the steps on page 9 to set
your display preferences.

1.3 Before you start

Open the fl ap on the front of your
FP735Si. Using a non-metallic object,
press and release the recessed RESET
button (R/S).
NOTE: Your FP735Si features a backlight
on it's display. Unless this has been
disabled or set to be on all the time, the
fi rst press of any button will cause the
backlight to come on. In order to action a
function, a repeat press of the button will
be required. All buttons will then operate
as normal until the unit is left untouched
for 2 minutes and then the next button
press will activate the backlight again.
Danfoss Heating
Weekend (Sat-Sun)
Hot Water
and
Heating
1st ON
1st OFF
2nd ON
2nd OFF
3rd ON
3rd OFF
Event Time
1 07:30
2 09:30
3 11:30
4 13:30
5 16:30
6 22:30
GB
Hot Water
and
Heating
1st ON
1st OFF
2nd ON
2nd OFF
3rd ON
3rd OFF
7