Danfoss FP735Si User Manual page 16

c) Press the NEXT button to move to the next preset time (Event 2)
(Fig. 24).
d) Repeat steps b, c, and d to programme the remaining events.
Programming "B" days and events
GB GB
a) Press the DAY button until the fi rst preset time (Event 1 for
Programme B) appears in display (Fig. 25).
b) Use the + or - buttons to adjust the TIME (press and hold to
change in 10 minute increments).
c) Press the PROG button to move to the next preset time (Event 2)
(Fig. 26).
d) Repeat steps b, c, and d to programme the remaining events.
Running the programme
Press the PROG button to return to previous RUN mode. The
heating will now follow the times programmed (Fig. 27).
Note: Advanced copy function is only available in 7 day mode.
16
Fig. 24
Fig. 25 Fig. 26 Fig. 27
FP735SI