Flavel Curve Installation And Maintenance Instructions Manual page 19

3.3 FITTING THE "CURVE" FASCIA
a) The "Curve" fascia is fitted to the product by hooking the top edge of
the fascia over the mounting brackets as shown in Fig. 14 below, then
securing with two screws on the bottom face of the trim as shown in
Fig. 15 below.
Fig. 14
Fig. 15
Align mounting bracket on "Curve"
fascia with mounting bracket on
combustion chamber and fix with
screws supplied
Image viewed from
underside of trim
19
Hook "Curve"
fascia onto top
mounting brackets