Monitor Test Mode - Pioneer AVH-P5700DVD Service Manual

1

6.6 MONITOR TEST MODE

- EEPROM Setting Mode
1. Start-up
A
• Reset and start-up the monitor microcomputer while EPRTEST terminal is in the Low.
• Press EQ key + SOURCE key together to Reset Start.
2. Operation
Switching setting mode
Press [MENU] key of remote control unit to go to the next mode.
Selecting an adjustment item to be changed
Press [ ↑ ↓ ] key of remote control unit.
Changing value of the selected item
Press [← →] key of remote control unit.
B
3. Setting mode
(1) Flicker adjustment mode (start-up mode)
(2) Line adjustment 1 mode
(3) Line adjustment 2 mode
(4) Line adjustment 3 mode
(5) Line adjustment 4 mode
(6) Line adjustment 5 mode
(7) Line adjustment 6 mode
(8) Line adjustment 7 mode
(9) Line adjustment 8 mode
(10) Line adjustment 9 mode
(11) Line adjustment 10 mode
C
(12) Parameter setting mode for dimmer
4. Operation key
[ Remote control code ]
D
Main unit key
(If pressing a monitor key in this adjustment mode, there is no affection in operation of the main unit.)
* Please note that there is a model by which the remote control signal is not connected to the monitor
microcomputer (in that case, operation should be done only by key).
* After writing a setting value to EEPROM, read and display it.
Writing and reading should be done in 16-bit unit. The bit number of settings varies in each item.
* After changing the value of CS (CHECKSUM), take exclusive OR (XOR) with 8-bit and execute writing.
After writing this CS value to EEPROM, read and display it, too.
If the written value and the read value are different, change the color of the read value.
E
F
140
1
2
head unit code
Key
MENU AD19AF63
↑
↓
←
→
AVH-P5700DVD/EW
2
3
Code
AD40
AD41
AD42
AD43
3
4
4