Pioneer AVH-P5700DVD Service Manual page 164

1
- Exchanging Flexible PCB (CNP8806)
A
: Valley fold
: Mountain fold
B
Mother unit side
C
1. When exchanging a flexible PCB (CNP8806), fold the PCB as indicated in the upper figure.
2. Connect the mother unit side of the flexible PCB to the connecter of the mother unit.
3. Remove release B part of coated paper of the flexible PCB.
4. Paste A part of the flexible PCB along the corner of the bracket (CND2627).
3. Paste C part of the flexible PCB on the bracket.
5. Paste the sheet (CNM9517) according to A part of the flexible PCB.
If the flexible PCB and the sheet are not contacted at this time, a monitor part will get damaged or a shutter
mechanism will get hung up. Make sure that the flexible PCB and the sheet contact a bracket.
In addition, since adhesive strength becomes weak, do not use again the sheet removed once.
D
Sheet (CNM9517)
E
F
164
1
2
Sheet (CNM9517)
A
Flexible PCB (CNP8806)
B
Flexible PCB (CNP8806)
Bracket (CND2627)
AVH-P5700DVD/EW
2
3
Release coated paper 1
Bracket (CND2627)
3
4
C
4