Pioneer AVH-P5700DVD Service Manual page 198

1
2. For a period of 500ms from the time when DIGOSW is switched from H to L, the angle driving motor is rotated
in the 0° direction for the "pressed down" motion.
A
3. After 500ms, brake is applied to the angle driving motor, and then the forward/backward driving motor is
rotated in the storage direction.
B
4. When the horizontal motion detection pulse is no longer detected for 200ms, brake is applied and the monitor
storage motion is completed.
C
- Explanation on the FLAP angle adjustment
1. The angle driving motor is rotated in UP direction by the "+" key and in DOWN direction by the "–" key from
the monitor stop position. If the key is kept pressed, the monitor will keep changing the angle without steps
within the range of 50 to 110 degrees. When the setback is being set to ON, the forward/backward driving
motor is rotated in the horizontal ejection direction while the key is being pressed, and angle adjustment is
made by changing the angle voltage to the extent the angle adjustment key is effective after 600ms has
D elapsed from the time when LIFTSW has switched from H to L. When 3 seconds have elapsed from the time
of angle adjustment completion, the forward/backward driving motor is rotated in slow speed in the horizontal
storage direction, and brake is applied when LIFTSW has switched from L to H.
E
F
198
1
2
AVH-P5700DVD/EW
2
3
3
4
4