Pioneer AVH-P5700DVD Service Manual page 197

5
5. When the angle voltage reaches the voltage for 110°, brake is applied to the angle driving motor, and the
ejection is completed. (In case the previous angle is stored in the memory, the motion continues to that angle.)
6. When the setback is set to ON, after the monitor angle voltage has reached the previously memorized voltage,
brake is applied to the angle driving motor, then the forward/backward driving motor is rotated in slow speed
in the storage direction. After that, when LIFTSW has switched from L to H, the forward/backward driving
motor is stopped.
- Explanation of the FLAP storage motion
1. When CLOSE key is pressed, or after 6 seconds from ACC OFF when auto OPEN/CLOSE is being set to ON, the
angle driving motor is rotated in the 0° direction. In case the setback setting is ON, the forward/backward
driving motor is rotated in high speed in the ejection direction and the motor continues to rotate for 600ms
from the time when LIFTSW is switched from H to L, then the angle driving motor is rotated in the 0° direction.
5
6
110° voltage position or the last memory position.
AVH-P5700DVD/EW
6
7
7
8
A
B
C
D
E
F
197
8