Parts List - Jacto X-15 Operator's Manual

PARTS LIST

14
6- INSTALLING THE LANCE HOLDERS
- Secure the lance holders to the rod as shown
below.
Screw
Holders
Rod
7- ATTACHING THE LANCE TO THE TRIGGER VALVE
- Push the lance into the trigger valve and secure it with the screw cap.
Elbow
Screw cap
Lance
ATTENTION:
Do not overtighten the screw cap.
8- ATTACHING THE HOSE TO THE TRIGGER VALVE
- Unscrew the trigger valve handle.
- Remove the lock.
- Pass the hose through the lock and attach it
to the trigger valve.
- Screw the handle on the trigger
ATTENTION: Do not overtighten the handle.
valve.
9- TIGHTENING THE FASTENING NUT.
- Before using the equipament, tighten the fastening nut (A).
Important: This operation must be carried out with the
hand. Never use any type of tool.
60mm
300mm
Trigger
valve
Handle
Lock
Trigger
Hose
valve
A
03